Encapsulation moves the insulation from the attic floor to the underside of the roof deck, so the attic becomes part of the conditioned space. We plan it for homes in Azle, Springtown, Fort Worth and across North Texas after a free energy audit shows whether it is worth it for your house.
In a vented attic the insulation sits on the attic floor and the attic itself bakes. Encapsulation changes where the line between inside and outside sits.
Spray foam goes on the underside of the roof deck instead of the attic floor, air sealing and insulating in one step.
The attic becomes part of the conditioned space instead of the hottest room in the house.
Ducts and HVAC equipment in the attic stop fighting 130-degree air.
We plan the foam, air sealing and ventilation together, not as separate jobs.
We install both, and we will recommend the one that fits your attic. Our attic insulation page covers the vented attic options.
Best for: Homes that would rather keep a vented attic. Adding blown-in fiberglass over the existing layer is the lower-cost way to reach current levels.
Installation matters: Even density, baffles at the eaves and accurate depth markers. More on our fiberglass insulation page.
Best for: Homes with the HVAC system and ducts in the attic, where pulling the attic inside the conditioned space helps most.
Installation matters: Foam, air sealing and ventilation are planned as one project. More on our spray foam insulation page.
Spray foam is a premium product, so encapsulation is not the answer for every attic. These are the homes where it tends to pay back.
Why moving the attic inside the conditioned space matters in North Texas.
Spray foam is unforgiving: temperature, ratio, pass technique and depth all have to be right.
Walk-through with blower door and thermal imaging. Identify where foam belongs and how thick it needs to be.
Cover floors, mask penetrations, protect HVAC and electrical before any foam goes on.
Two-component proportioner heated to spec. Even passes, controlled depth, no missed bays.
Post-install thermal scan to confirm coverage. Trim, clean up and walk you through the result.
Encapsulation moves the insulation from the attic floor to the underside of the roof deck, so the attic becomes part of the conditioned space. Spraying foam on the roof deck pulls the attic and its ductwork inside, so the ducts up there stop fighting 130-degree air.
Not always. If you would rather keep a vented attic, adding blown-in fiberglass over the existing layer is the lower-cost way to reach current levels. Encapsulation helps most when the HVAC system and ducts are in the attic. The audit tells us which one fits your house.
Often, yes. Most homes leak 15 to 25% of their conditioned air at duct joints, and in North Texas those joints are usually in the attic. Sealing them while the attic is open is the easiest time to reach every connection. See our duct sealing page.
It depends on the foam type, the square footage of the roof deck, how thick the foam goes on, how easy the attic is to reach and how much prep comes first. Our spray foam insulation cost guide explains each factor, and the free energy audit gives you a real quote.
Yes. We are based in Azle and serve Springtown, Fort Worth, Dallas, Weatherford, Highland Park and the surrounding North Texas area. Call 817-670-5671 and ask.
The audit is free. If a simple top-up is the better answer, we will tell you that, too.
